Save a Dive Kit (Liveaboard/Resort/Remote)

ItemDescription
Critical backup equipment
Basic backup dive computerSimple secondary computer kept in BC or suit pocket from the beginning of the trip to account for repetitive dives, so a primary computer failure does not end the diving.
Complete spare maskComplete replacement for a failed, lost, or damaged primary mask.
Complete backup regulator setWhile this may seem excessive, an extra first and second stage may save the trip if a failure cannot be repaired in the field.
Backup batteries/charger for primary lightSpare battery, charger, or equivalent redundancy appropriate to the primary light system.
Backup SMB spoolBackup spool for SMB deployment if the primary spool is lost, damaged, or jammed.
Regulator and breathing-system spares
Spare regulator mouthpieceReplacement for a torn, split, or damaged mouthpiece.
SPG spools2 complete swivel spools for the HP hose-to-SPG connection.
O-rings appropriate for regulators, inflators, and dump valves3 of each required type, selected specifically for the equipment being carried. Keep each size and material clearly separated and labeled.
DIN-to-yoke adapterAllows a DIN regulator to connect to a yoke-only cylinder valve.
Backup regulator necklace bungee or backup octopus retainerReplacement retention system for keeping the backup second stage correctly positioned and immediately accessible.
Mask, fin, and BC/harness spares
Mask strapReplacement strap when the mask itself remains serviceable.
Fin strap/spring assembly2 complete assemblies, including any proprietary buckle, pin, or mounting hardware required for installation.
Spare complete weight pocketReplacement integrated weight pocket for a jacket-style BC if a pocket or its integral hardware is lost or damaged.
Matching plastic shoulder/waist buckleReplacement proprietary plastic buckle matching the jacket BC or harness being carried.
Stainless waist buckleReplacement buckle for a BP/W continuous webbing harness.
Repair materials and consumables
AquasealFlexible adhesive and sealant for appropriate exposure-suit and soft-equipment repairs.
Gaffer tapeStrong temporary securing material for noncritical repairs and organizing damaged equipment until a proper repair can be made.
Cable tiesSmall assortment for securing mouthpieces and making temporary non-life support repairs.
Bungee/shock cordSpare elastic cord for necklaces, retainers, equipment loops, and similar rigging.
#24 braided nylon cave lineSpare line for bolt snap attachment and other nonelastic equipment rigging.
Appropriate wetsuit or drysuit patch kitPatch materials and adhesive specifically compatible with the exposure suit being used.
Electronics
Appropriate charging cableDedicated spare or required charging cable for the dive computer or other rechargeable equipment being carried.
Work surface
White silicone mat or white plastic sheetClean, high-contrast work surface that makes small O-rings, screws, spools, and fittings easier to see and harder to lose.
Tools
Compact tool setOpen-end wrenches: 7/16", 1/2", 9/16", 5/8", 11/16", and 15 mm. Hex keys: 7/64" and 1/8". Screwdrivers: Phillips #1, 1/8" flat, and 3/16" flat. Also: brass or plastic O-ring pick, small needle-nose pliers, small side cutters, small scissors, manufacturer-approved lubricant appropriate to the specific equipment and breathing gas; oxygen-compatible lubricant where required, lighter for finishing nylon line and bungee ends, and a small flashlight or headlamp.

Want a gear set chosen for your diving, fit, and budget?

Request a personalized recommendation